Illustration, not a photograph. Official product imagery pending.
Ubiquiti UniFi U6+ Wi-Fi 6 Access Point
In stock
Wi-Fi 6 access point. Wireless standard: Wi-Fi 6, 802.11ax.
Direct answer: is the Ubiquiti UniFi U6+ Wi-Fi 6 Access Point right for you?
The advertised 3 Gbps is both radios added together, which no single client ever sees -- a laptop on the 5 GHz radio negotiates up to 2,402 Mbps and gets rather less through a wall.
Ubiquiti UniFi U6+ Wi-Fi 6 Access Point
Editorial verdict
Grounded in published specifications
Summary verdict: The advertised 3 Gbps is both radios added together, which no single client ever sees -- a laptop on the 5 GHz radio negotiates up to 2,402 Mbps and gets rather less through a wall. A single gigabit uplink caps the whole access point at 1 Gbps regardless of what the radios negotiate, so the wired port is the real ceiling in a busy room. It is 2x2 rather than 4x4, which shows up as reduced range and lower throughput with many simultaneous clients rather than as a lower headline figure.
Who should buy this
Offices replacing consumer routers with managed access points, where client count matters more than peak speed.
Who should avoid this
High-density halls and anyone who needs the uplink to carry more than a gigabit.
Key strengths
- Wi-Fi 6 with OFDMA and target wake time for dense client counts
- Powered by 802.3af PoE, so no separate adapter at the ceiling
- Managed by the same controller as the rest of the UniFi range
Limitations
- 2x2 MIMO, not the 4x4 of the Pro models
- One gigabit uplink caps the whole access point at 1 Gbps
- No 6 GHz band -- this is Wi-Fi 6, not 6E
Technical specifications
- Type
- Wi-Fi 6 access point
- Brand
- Ubiquiti
- Mounting
- Ceiling or wall, bracket included
- Warranty
- 1-year limited hardware warranty
- Model SKU
- U6-Plus
- Rated power
- About 9.5 W maximum
- Uplink port
- 1 x Gigabit Ethernet
- Power method
- 802.3af PoE, no injector supplied
- Rated throughput
- 573.5 Mbps at 2.4 GHz, 2,402 Mbps at 5 GHz
- Annual energy use
- About 83 kWh a year running continuously, roughly $14 at $0.17 per kWh
- Wireless standard
- Wi-Fi 6, 802.11ax
- Concurrent clients
- About 300 stated, far fewer at usable throughput
- Radio configuration
- 2x2 MIMO on both bands
Product overview
The advertised 3 Gbps is both radios added together, which no single client ever sees -- a laptop on the 5 GHz radio negotiates up to 2,402 Mbps and gets rather less through a wall. A single gigabit uplink caps the whole access point at 1 Gbps regardless of what the radios negotiate, so the wired port is the real ceiling in a busy room. It is 2x2 rather than 4x4, which shows up as reduced range and lower throughput with many simultaneous clients rather than as a lower headline figure.
Key capabilities
- Wireless standard: Wi-Fi 6, 802.11ax
- Radio configuration: 2x2 MIMO on both bands
- Rated throughput: 573.5 Mbps at 2.4 GHz, 2,402 Mbps at 5 GHz
- Uplink port: 1 x Gigabit Ethernet
Frequently asked questions
Is the Ubiquiti UniFi U6+ Wi-Fi 6 Access Point worth buying?
The advertised 3 Gbps is both radios added together, which no single client ever sees -- a laptop on the 5 GHz radio negotiates up to 2,402 Mbps and gets rather less through a wall.
What is the warranty and return policy for the Ubiquiti UniFi U6+ Wi-Fi 6 Access Point?
1-year limited hardware warranty. Returns: 90-day returns on unused items.
Who is the Ubiquiti UniFi U6+ Wi-Fi 6 Access Point best suited for?
Offices replacing consumer routers with managed access points, where client count matters more than peak speed.
Who should avoid the Ubiquiti UniFi U6+ Wi-Fi 6 Access Point?
High-density halls and anyone who needs the uplink to carry more than a gigabit.
Goes with this
What the wi-fi 6 access point needs alongside it.
- NETGEARGS308PP-100NASRepresentative
NETGEAR GS308PP 8-Port Gigabit PoE+ Unmanaged Switch
Powered over Ethernet with no injector in the box.
$109.99
- UbiquitiUSW-Lite-16-PoERepresentative
Ubiquiti UniFi Switch Lite 16 PoE
Powered over Ethernet with no injector in the box.
$199.00
Suggested from recorded compatibility and product type, not from purchase history.
Sample reviews
5 reviewsThese are illustrative, not customer reviews.
DealSurge has not sold this product, so nobody has reviewed it. Each entry below is written from the strengths and drawbacks recorded on this page, to show how reviews would appear — none of it is a real buyer’s experience, and none of it is counted in search results or given to the shopping assistant.
Mean of 5 samples
- 5 ★2
- 4 ★2
- 3 ★1
- 2 ★0
- 1 ★0
- 4 out of 5 stars, in a sample review of Ubiquiti UniFi U6+ Wi-Fi 6 Access Point
Four stars, and here is the fifth — 2x2 MIMO
Wi-Fi 6 with OFDMA and target wake time for dense client counts. The one thing to know before ordering: 2x2 MIMO, not the 4x4 of the Pro models. To be fair that is written on the product page. I skimmed past it and had to rearrange things afterwards.
Alka N.Sample8 found this helpful - 5 out of 5 stars, in a sample review of Ubiquiti UniFi U6+ Wi-Fi 6 Access Point
Right product for the right person
The page describes who this is for, and it described me: Offices replacing consumer routers with managed access points, where client count matters more than peak speed. On that basis it has been the right call. Wi-Fi 6 with OFDMA and target wake time for dense client counts.
Kabir S.Sample2 found this helpful - 5 out of 5 stars, in a sample review of Ubiquiti UniFi U6+ Wi-Fi 6 Access Point
Does the one thing I bought it for
Wi-Fi 6 with OFDMA and target wake time for dense client counts. That was the whole reason I picked this over the cheaper options, and it is exactly as described. Also worth mentioning: Powered by 802.3af PoE, so no separate adapter at the ceiling. No regrets after most of a year.
Chetan H.Sample14 found this helpful - 3 out of 5 stars, in a sample review of Ubiquiti UniFi U6+ Wi-Fi 6 Access Point
Be ready for one thing — 2x2 MIMO
Leading with the problem, because it is what I would have wanted to read: 2x2 MIMO, not the 4x4 of the Pro models. One gigabit uplink caps the whole access point at 1 Gbps. Neither is hidden — both are listed on the page — but they matter more in daily use than they look on a spec sheet. I have kept it, for one reason: Wi-Fi 6 with OFDMA and target wake time for dense client counts. That still outweighs the rest, but only just.
Gita N.Sample30 found this helpful - 4 out of 5 stars, in a sample review of Ubiquiti UniFi U6+ Wi-Fi 6 Access Point
Posting after real use, not unboxing
Had this six weeks now, so this is not an unboxing opinion. Powered by 802.3af PoE, so no separate adapter at the ceiling. Still mildly irritated by one thing: 2x2 MIMO, not the 4x4 of the Pro models. Known trade-off rather than a fault, though, and I would buy it again.
Aarav A.Sample13 found this helpful