Spigen Liquid Air Case for iPhone 15 Pro Max (ACS06644) vs Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad
What separates them
These two differ on 1 recorded specification. The Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad is ₹500 dearer.
Spigen Liquid Air Case for iPhone 15 Pro Max (ACS06644) vs Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad
Spigen
Spigen Liquid Air Case for iPhone 15 Pro Max (ACS06644)
₹1,499
MIL-STD-810G on a phone case is worth understanding for what it is not: a test methodology, not a certification anyone grants or audits, where the manufacturer chooses the drop height and declares its own result.
Full details →
Havit
Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad
₹1,999
Worth being clear about what a cooling pad can do.
Full details →Who the Spigen Liquid Air Case for iPhone 15 Pro Max is for
Buy it if: Anyone wanting slim protection with good grip and no yellowing.
Avoid it if: Anyone using MagSafe accessories -- there are no magnets, so mounts and wallets will not hold.
Who the Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad is for
Buy it if: Anyone with a gaming or workstation laptop that has bottom intake vents.
Avoid it if: Anyone with a sealed-base ultrabook or a MacBook -- there is nowhere for the air to go.
Specifications, side by side
1 of 18 rows differ. Differences first.
| Specification | Spigen Liquid Air Case for iPhone 15 Pro Max | Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad |
|---|---|---|
| Price | ₹1,499 | ₹1,999 |
| Weight | 38 g | 700 g |
| Warranty | 1 Year Official Brand Warranty | 1 Year Official Brand Warranty |
| Airflow | not published | Roughly 40 cubic feet per minute combined |
| Drop protection | Air Cushion corners. Spigen states MIL-STD-810G 516.6 compliance | not published |
| Fans | not published | Two 110 mm, about 1000 rpm |
| Fits | not published | Laptops up to 17 inches |
| Form factor | not published | Laptop cooling pad |
| Grip | Matte textured back, which resists fingerprints far better than glossy TPU | not published |
| Height settings | not published | Five, from 3 to 9 cm at the rear |
| Material | Single-piece thermoplastic polyurethane | not published |
| Noise | not published | About 45 dB |
| Power | not published | USB, with a pass-through port |
| Raised bezel | 1.2 mm at the screen, 1.5 mm at the camera | not published |
| Realistic effect | not published | Typically 2 to 5 degrees C on a chassis with bottom intake vents, and close to nothing on one without |
| Thickness added | About 1.8 mm | not published |
| What MIL-STD-810G means | A test *method*, not a pass mark. The manufacturer selects the drop height and self-certifies the result | not published |
| Wireless charging | Works through the case; no MagSafe magnets, so a MagSafe accessory will slide | not published |
| Yellowing | Clear TPU yellows with UV over time; this is pigmented, so it does not | not published |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Spigen Liquid Air Case for iPhone 15 Pro Max with something else →