Milwaukee M18 FUEL 1/2 in. Hammer Drill Driver (Tool Only) vs RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum
What separates them
These two differ on 1 recorded specification. The Milwaukee M18 FUEL 1/2 in. Hammer Drill Driver (Tool Only) is $70.00 dearer. They are different kinds of product — cordless hammer drill against wet dry vacuum — so read the table as two spec sheets rather than a like-for-like.
Milwaukee M18 FUEL 1/2 in. Hammer Drill Driver (Tool Only) vs RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum
Milwaukee
Milwaukee M18 FUEL 1/2 in. Hammer Drill Driver (Tool Only)
$199.00
Tool only. No battery, no charger, no case -- an M18 battery and charger add roughly $150 if this is the first M18 tool in the shop.
Full details →RIDGID
RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum
$129.00
"Peak HP" is a marketing figure measured at stall, not a running rating -- the numbers worth comparing are airflow and sealed suction, and this pulls about 190 CFM.
Full details →Who the Milwaukee M18 FUEL 1/2 in. Hammer Drill Driver is for
Buy it if: Trades already on M18 who need masonry capability and high torque.
Avoid it if: First-time buyers with no M18 batteries, and anyone working overhead for long stretches.
Who the RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum is for
Buy it if: Workshops and garages handling both sawdust and spills.
Avoid it if: Anyone wanting a portable vacuum for a vehicle or a stairwell.
Specifications, side by side
1 of 19 rows differ. Differences first.
| Specification | Milwaukee M18 FUEL 1/2 in. Hammer Drill Driver | RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum |
|---|---|---|
| Price | $199.00 | $129.00 |
| Warranty | 5-year limited warranty | Lifetime limited warranty |
| Airflow | not published | About 190 CFM |
| Batteries included | None -- tool only | not published |
| Battery platform | Milwaukee M18 | not published |
| Blower port | not published | Fitted |
| Blows per minute | Up to 32,000 | not published |
| Chuck size | 1/2 in all-metal ratcheting | not published |
| Drum capacity | not published | 14 gal |
| Hose diameter | not published | 2-1/2 in |
| Hose length | not published | 7 ft |
| Max torque | 1,200 in-lb | not published |
| Motor type | Brushless POWERSTATE | not published |
| No-load speed | 0-550 and 0-2,000 rpm | not published |
| Peak horsepower | not published | 6.0 peak HP, a stall measurement |
| Power source | not published | Corded, 120 V |
| Rated power | not published | About 1,400 W |
| Safety feature | AUTOSTOP kickback control | not published |
| Tool weight | 4.4 lb bare | not published |
| Wet pickup | not published | Yes, with filter removed |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Milwaukee M18 FUEL 1/2 in. Hammer Drill Driver with something else →