Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad vs Spigen Liquid Air Case for iPhone 15 Pro Max (ACS06644)
What separates them
These two differ on 1 recorded specification. The Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad is ₹500 dearer.
Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad vs Spigen Liquid Air Case for iPhone 15 Pro Max (ACS06644)
Havit
Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad
₹1,999
Worth being clear about what a cooling pad can do.
Full details →Spigen
Spigen Liquid Air Case for iPhone 15 Pro Max (ACS06644)
₹1,499
MIL-STD-810G on a phone case is worth understanding for what it is not: a test methodology, not a certification anyone grants or audits, where the manufacturer chooses the drop height and declares its own result.
Full details →Who the Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad is for
Buy it if: Anyone with a gaming or workstation laptop that has bottom intake vents.
Avoid it if: Anyone with a sealed-base ultrabook or a MacBook -- there is nowhere for the air to go.
Who the Spigen Liquid Air Case for iPhone 15 Pro Max is for
Buy it if: Anyone wanting slim protection with good grip and no yellowing.
Avoid it if: Anyone using MagSafe accessories -- there are no magnets, so mounts and wallets will not hold.
Specifications, side by side
1 of 18 rows differ. Differences first.
| Specification | Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad | Spigen Liquid Air Case for iPhone 15 Pro Max |
|---|---|---|
| Price | ₹1,999 | ₹1,499 |
| Weight | 700 g | 38 g |
| Warranty | 1 Year Official Brand Warranty | 1 Year Official Brand Warranty |
| Airflow | Roughly 40 cubic feet per minute combined | not published |
| Drop protection | not published | Air Cushion corners. Spigen states MIL-STD-810G 516.6 compliance |
| Fans | Two 110 mm, about 1000 rpm | not published |
| Fits | Laptops up to 17 inches | not published |
| Form factor | Laptop cooling pad | not published |
| Grip | not published | Matte textured back, which resists fingerprints far better than glossy TPU |
| Height settings | Five, from 3 to 9 cm at the rear | not published |
| Material | not published | Single-piece thermoplastic polyurethane |
| Noise | About 45 dB | not published |
| Power | USB, with a pass-through port | not published |
| Raised bezel | not published | 1.2 mm at the screen, 1.5 mm at the camera |
| Realistic effect | Typically 2 to 5 degrees C on a chassis with bottom intake vents, and close to nothing on one without | not published |
| Thickness added | not published | About 1.8 mm |
| What MIL-STD-810G means | not published | A test *method*, not a pass mark. The manufacturer selects the drop height and self-certifies the result |
| Wireless charging | not published | Works through the case; no MagSafe magnets, so a MagSafe accessory will slide |
| Yellowing | not published | Clear TPU yellows with UV over time; this is pigmented, so it does not |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Havit RGB Dual 110mm Fan Ergonomic Laptop Cooling Pad with something else →