Aqara Zigbee Motion & Light Sensor P1 (MS-S02) vs Wipro Next Smart Wi-Fi 2-Node Retrofit Module for Indian Modular Switchboards
What separates them
These two differ on 8 recorded specifications. The Aqara Zigbee Motion & Light Sensor P1 (MS-S02) is ₹809 dearer.
Aqara Zigbee Motion & Light Sensor P1 (MS-S02) vs Wipro Next Smart Wi-Fi 2-Node Retrofit Module for Indian Modular Switchboards
Aqara
Aqara Zigbee Motion & Light Sensor P1 (MS-S02)
₹2,499
The configurable detection interval is what separates this from cheaper PIR sensors: most are locked to roughly a minute of cooldown, which makes them useless for lighting a corridor you walk back down thirty seconds later.
Full details →Wipro
Wipro Next Smart Wi-Fi 2-Node Retrofit Module for Indian Modular Switchboards
₹1,690
A module rather than a switch plate, which is the detail that matters in India.
Full details →Who the Aqara Zigbee Motion & Light Sensor P1 is for
Buy it if: Anyone running a Zigbee hub who wants motion-triggered lighting that does not fire in daylight.
Avoid it if: Anyone without a Zigbee hub, and anyone needing outdoor placement -- this is IP20.
Who the Wipro Next Smart Wi-Fi 2-Node Retrofit Module for Indian Modular Switchboards is for
Buy it if: Anyone with a neutral wire at the switch who wants two circuits automated without changing the switchboard's appearance.
Avoid it if: Anyone in an older building with no neutral at the switch -- a no-neutral Zigbee module is the alternative.
Specifications, side by side
8 of 19 rows differ. Differences first.
| Specification | Aqara Zigbee Motion & Light Sensor P1 | Wipro Next Smart Wi-Fi 2-Node Retrofit Module for Indian Modular Switchboards |
|---|---|---|
| Price | ₹2,499 | ₹1,690 |
| Battery life | Up to 5 years | Not applicable, mains powered |
| Hub required | Yes -- Requires an Aqara hub, SmartThings, Home Assistant or another Zigbee coordinator | No -- Connects directly to the router |
| Local control | Yes. Motion events and hub-side automations run with no internet connection | Partial. The existing physical switches keep working normally; app and voice control require internet |
| Power source | CR2450 coin cell | Mains, wired inside the switchboard |
| Protocol | Zigbee 3.0 | Wi-Fi 2.4 GHz |
| Warranty | 1 Year Official Brand Warranty | 1 Year Manufacturer Warranty |
| Weather rating | IP20, indoor use only | IP20, enclosed in the switchbox |
| Works with | Apple Home, Alexa, Google Home and Home Assistant via the hub | Amazon Alexa, Google Home, Wipro Next app |
| Box fit | not published | Sits inside a standard Indian modular back box |
| Channels | not published | 2 independent |
| Detection interval | Configurable from 1 to 200 seconds | not published |
| Detection range | Up to 7 metres | not published |
| Field of view | 170 degrees | not published |
| Installation | not published | Behind the switch plate, licensed electrician recommended |
| Light sensor | Built in, 0 to 83,000 lux | not published |
| Load per channel | not published | Up to 5 A |
| Neutral wire | not published | Required -- will not work in boards wired without a neutral at the switch |
| Physical switches | not published | Existing switches continue to work in parallel |
| Size | 30 x 30 x 32 mm | not published |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Aqara Zigbee Motion & Light Sensor P1 with something else →