Aqara Zigbee Motion & Light Sensor P1 (MS-S02) vs Qubo Smart Wi-Fi Indoor Security Camera 360 Degree (Hero Group, 1080p)
What separates them
These two differ on 7 recorded specifications. The Qubo Smart Wi-Fi Indoor Security Camera 360 Degree (Hero Group, 1080p) is ₹491 dearer.
Aqara Zigbee Motion & Light Sensor P1 (MS-S02) vs Qubo Smart Wi-Fi Indoor Security Camera 360 Degree (Hero Group, 1080p)
Aqara
Aqara Zigbee Motion & Light Sensor P1 (MS-S02)
₹2,499
The configurable detection interval is what separates this from cheaper PIR sensors: most are locked to roughly a minute of cooldown, which makes them useless for lighting a corridor you walk back down thirty seconds later.
Full details →Qubo
Qubo Smart Wi-Fi Indoor Security Camera 360 Degree (Hero Group, 1080p)
₹2,990
The specification worth reading is the one about subscriptions.
Full details →Who the Aqara Zigbee Motion & Light Sensor P1 is for
Buy it if: Anyone running a Zigbee hub who wants motion-triggered lighting that does not fire in daylight.
Avoid it if: Anyone without a Zigbee hub, and anyone needing outdoor placement -- this is IP20.
Who the Qubo Smart Wi-Fi Indoor Security Camera 360 Degree is for
Buy it if: Anyone who wants indoor monitoring without an ongoing subscription.
Avoid it if: Anyone needing 2K detail or outdoor placement -- this is 1080p and IP20.
Specifications, side by side
7 of 20 rows differ. Differences first.
| Specification | Aqara Zigbee Motion & Light Sensor P1 | Qubo Smart Wi-Fi Indoor Security Camera 360 Degree |
|---|---|---|
| Price | ₹2,499 | ₹2,990 |
| Battery life | Up to 5 years | Not applicable, mains powered |
| Hub required | Yes -- Requires an Aqara hub, SmartThings, Home Assistant or another Zigbee coordinator | No -- Connects directly to the router |
| Local control | Yes. Motion events and hub-side automations run with no internet connection | Partial. Recording to the microSD card continues during an internet outage; remote viewing does not |
| Power source | CR2450 coin cell | Mains via micro-USB adapter |
| Protocol | Zigbee 3.0 | Wi-Fi 2.4 GHz |
| Warranty | 1 Year Official Brand Warranty | 1 Year Manufacturer Warranty |
| Works with | Apple Home, Alexa, Google Home and Home Assistant via the hub | Amazon Alexa, Google Home, Qubo app |
| Weather rating | IP20, indoor use only | IP20, indoor use only |
| Detection interval | Configurable from 1 to 200 seconds | not published |
| Detection range | Up to 7 metres | not published |
| Field of view | 170 degrees | not published |
| Light sensor | Built in, 0 to 83,000 lux | not published |
| Local storage | not published | microSD up to 128 GB, card not included |
| Neutral wire | not published | Not applicable |
| Night vision | not published | Infrared to approximately 10 metres |
| Pan and tilt | not published | 355 degrees horizontal, 105 degrees vertical |
| Resolution | not published | 1080p at 15 fps |
| Size | 30 x 30 x 32 mm | not published |
| Subscription | not published | Not required for local recording |
| Two-way audio | not published | Yes |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Aqara Zigbee Motion & Light Sensor P1 with something else →