Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0) vs Syska Smart Wi-Fi RGB LED Strip Light 5 Metre with App and Voice Control
What separates them
These two differ on 7 recorded specifications. The Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0) is ₹500 dearer.
Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0) vs Syska Smart Wi-Fi RGB LED Strip Light 5 Metre with App and Voice Control
Aqara
Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0)
₹1,799
The reason to own one is not to read the temperature -- your phone will tell you that.
Full details →Syska
Syska Smart Wi-Fi RGB LED Strip Light 5 Metre with App and Voice Control
₹1,299
Single-zone rather than addressable, which is the honest difference between this and strips costing twice as much: the whole 5 metres shows one colour at a time, so the flowing multi-colour effects in the marketing images are not something this can produce.
Full details →Who the Aqara Temperature and Humidity Sensor T1 is for
Buy it if: Anyone already running a Zigbee hub who wants humidity or temperature to drive automations.
Avoid it if: Anyone without a hub, and anyone who only wants to see a number rather than act on it.
Who the Syska Smart Wi-Fi RGB LED Strip Light 5 Metre with App and Voice Control is for
Buy it if: Anyone adding accent or cove lighting on a budget who wants one colour at a time.
Avoid it if: Anyone expecting the multi-colour chasing effects shown in strip-light advertising -- that needs an addressable RGBIC strip.
Specifications, side by side
7 of 18 rows differ. Differences first.
| Specification | Aqara Temperature and Humidity Sensor T1 | Syska Smart Wi-Fi RGB LED Strip Light 5 Metre with App and Voice Control |
|---|---|---|
| Price | ₹1,799 | ₹1,299 |
| Battery life | Approximately 2 years | Not applicable, mains powered |
| Hub required | Yes -- Requires an Aqara hub, SmartThings, Home Assistant or another Zigbee coordinator | No -- Connects directly to the router |
| Local control | Yes. Readings and hub-side automations continue without internet access | No. App and voice control both route through the vendor cloud |
| Power source | CR2032 coin cell | Mains via 12 V adapter |
| Protocol | Zigbee 3.0 | Wi-Fi 2.4 GHz |
| Weather rating | IP20, indoor use only | IP20, indoor use only -- not suitable for balconies or bathrooms |
| Works with | Apple Home, Alexa, Google Home and Home Assistant via the hub | Amazon Alexa, Google Home |
| Neutral wire | Not applicable | Not applicable |
| Warranty | 1 Year Manufacturer Warranty | 1 Year Manufacturer Warranty |
| Colour range | not published | 16 million colours, single zone |
| Cuttable | not published | Yes, at marked 10 cm intervals |
| Humidity accuracy | Plus or minus 3 percent RH | not published |
| Humidity range | 0 to 100 percent RH | not published |
| LED density | not published | 30 LEDs per metre, 5050 SMD |
| Length | not published | 5 metres |
| Reporting | On change, roughly every 0.5 degrees C or 3 percent RH | not published |
| Temperature accuracy | Plus or minus 0.3 degrees C | not published |
| Temperature range | -20 to 60 degrees C | not published |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Aqara Temperature and Humidity Sensor T1 with something else →