Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I vs KILZ 2 All-Purpose Interior Latex Primer, 5 Gallon
What separates them
These two differ on 1 recorded specification. The Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I is $10.00 dearer. They are different kinds of product — step ladder against interior primer — so read the table as two spec sheets rather than a like-for-like.
Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I vs KILZ 2 All-Purpose Interior Latex Primer, 5 Gallon
Werner
Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I
$99.00
Fiberglass rather than aluminium is the specification that matters near electricity -- the rails do not conduct, which is why this is the ladder for anything involving a light fitting or a service panel.
Full details →KILZ
KILZ 2 All-Purpose Interior Latex Primer, 5 Gallon
$89.00
A water-based primer, which is the important limitation: it seals light stains and gives topcoat adhesion, and it will not block heavy water, smoke or tannin stains -- those need a shellac or oil primer.
Full details →Who the Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I is for
Buy it if: Anyone working near electrical fittings, where an aluminium ladder is a hazard.
Avoid it if: Buyers who need reach above about 10 ft, who need an 8 ft ladder or an extension.
Who the KILZ 2 All-Purpose Interior Latex Primer, 5 Gallon is for
Buy it if: Bare drywall, patched walls and colour changes before a finish coat.
Avoid it if: Heavy water, smoke or tannin stains, which need a shellac-based primer instead.
Specifications, side by side
1 of 17 rows differ. Differences first.
| Specification | Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I | KILZ 2 All-Purpose Interior Latex Primer, 5 Gallon |
|---|---|---|
| Price | $99.00 | $89.00 |
| Warranty | 1-year limited warranty | Manufacturer satisfaction guarantee |
| Base | not published | Water-based latex |
| Cleanup | not published | Soap and water |
| Container size | not published | 5 gal |
| Coverage | not published | 300 to 400 sq ft per gallon |
| Dry time to touch | not published | About 30 minutes |
| Duty rating | 250 lb, Type I | not published |
| Ladder height | 6 ft | not published |
| One-coat coverage | not published | About 1,750 sq ft per pail |
| Rail material | Fiberglass, non-conductive | not published |
| Recoat | not published | About 1 hour |
| Stain blocking | not published | Light stains only |
| Standards | ANSI Type I, OSHA compliant | not published |
| Step count | 5 including the top | not published |
| Step type | Slip-resistant, serrated | not published |
| VOC content | not published | Less than 50 g/L |
| Working height | About 10 ft | not published |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I with something else →