Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I vs DEWALT 20V MAX Cordless 1/2 in. Drill Driver Kit
What separates them
These two differ on 1 recorded specification. They are different kinds of product — step ladder against cordless drill driver — so read the table as two spec sheets rather than a like-for-like.
Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I vs DEWALT 20V MAX Cordless 1/2 in. Drill Driver Kit
Werner
Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I
$99.00
Fiberglass rather than aluminium is the specification that matters near electricity -- the rails do not conduct, which is why this is the ladder for anything involving a light fitting or a service panel.
Full details →DEWALT
DEWALT 20V MAX Cordless 1/2 in. Drill Driver Kit
$99.00
The two 1.3 Ah batteries in this kit are the compromise that makes the price -- they are compact and they run down fast, and most buyers end up adding a 4 Ah pack within a year.
Full details →Who the Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I is for
Buy it if: Anyone working near electrical fittings, where an aluminium ladder is a hazard.
Avoid it if: Buyers who need reach above about 10 ft, who need an 8 ft ladder or an extension.
Who the DEWALT 20V MAX Cordless 1/2 in. Drill Driver Kit is for
Buy it if: Homeowners and light trades starting on the 20V MAX platform.
Avoid it if: Anyone drilling masonry or driving lag screws daily, who needs a brushless hammer drill.
Specifications, side by side
1 of 17 rows differ. Differences first.
| Specification | Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I | DEWALT 20V MAX Cordless 1/2 in. Drill Driver Kit |
|---|---|---|
| Price | $99.00 | $99.00 |
| Warranty | 1-year limited warranty | 3-year limited warranty, 1-year free service |
| Batteries included | not published | 2 x 1.3 Ah lithium-ion |
| Battery platform | not published | DEWALT 20V MAX |
| Charger included | not published | Yes, standard rate |
| Chuck size | not published | 1/2 in ratcheting keyless |
| Duty rating | 250 lb, Type I | not published |
| Hammer function | not published | None |
| Ladder height | 6 ft | not published |
| Max torque | not published | About 300 unit watts out |
| Motor type | not published | Brushed |
| No-load speed | not published | 0-450 and 0-1,500 rpm |
| Rail material | Fiberglass, non-conductive | not published |
| Standards | ANSI Type I, OSHA compliant | not published |
| Step count | 5 including the top | not published |
| Step type | Slip-resistant, serrated | not published |
| Tool weight | not published | 3.6 lb with battery |
| Working height | About 10 ft | not published |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I with something else →