TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring vs Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
What separates them
These two differ on 7 recorded specifications. The Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67) is ₹491 dearer.
TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring vs Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
TP-Link
TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring
₹1,499
This is the plug the US-pin Kasa four-pack should have been.
Full details →Aqara
Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
₹1,990
A Rs1,990 device whose entire value is measured against the cost of the thing it prevents.
Full details →Who the TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring is for
Buy it if: Anyone metering or scheduling a high-draw appliance who wants the schedule to survive an outage.
Avoid it if: Anyone on Apple Home, and anyone who needs more than one socket switched independently.
Who the Aqara Water Leak Sensor T1 is for
Buy it if: Anyone with a geyser, water tank, or washing machine on a floor that would be expensive to water-damage.
Avoid it if: Anyone without a Zigbee hub -- there is no standalone siren on the sensor itself.
Specifications, side by side
7 of 18 rows differ. Differences first.
| Specification | TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring | Aqara Water Leak Sensor T1 |
|---|---|---|
| Price | ₹1,499 | ₹1,990 |
| Battery life | Not applicable, mains powered | Approximately 2 years |
| Hub required | No -- Connects directly to the router | Yes -- Requires an Aqara hub or another Zigbee coordinator |
| Local control | Yes. Schedules, timers and away mode all run on the plug itself and continue with no internet connection | Yes. The hub sounds its siren and runs automations with no internet connection |
| Power source | Mains, Indian 16 A three-pin | CR2032 coin cell |
| Protocol | Wi-Fi 2.4 GHz | Zigbee 3.0 |
| Weather rating | IP20, indoor use only | IP67 -- survives full immersion, which is the point |
| Works with | Amazon Alexa, Google Home, Tapo app | Apple Home, Alexa, Google Home and Home Assistant via the hub |
| Neutral wire | Not applicable | Not applicable |
| Warranty | 1 Year Manufacturer Warranty | 1 Year Manufacturer Warranty |
| Alarm | not published | Hub-side siren and push notification |
| Detection | not published | Two contact probes on the underside, triggers within 1 second |
| Diameter | not published | 50 mm |
| Energy monitoring | Live wattage plus daily, weekly and monthly kWh history | not published |
| Maximum load | 3680 W | not published |
| Placement | not published | Under sinks, behind washing machines, near water tanks and geysers |
| Rated current | 16 A | not published |
| Schedules | Stored on the device | not published |
| Socket type | Indian 3-pin 16 A | not published |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring with something else →