TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring vs Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0)
What separates them
These two differ on 6 recorded specifications. The Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0) is ₹300 dearer.
TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring vs Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0)
TP-Link
TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring
₹1,499
This is the plug the US-pin Kasa four-pack should have been.
Full details →Aqara
Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0)
₹1,799
The reason to own one is not to read the temperature -- your phone will tell you that.
Full details →Who the TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring is for
Buy it if: Anyone metering or scheduling a high-draw appliance who wants the schedule to survive an outage.
Avoid it if: Anyone on Apple Home, and anyone who needs more than one socket switched independently.
Who the Aqara Temperature and Humidity Sensor T1 is for
Buy it if: Anyone already running a Zigbee hub who wants humidity or temperature to drive automations.
Avoid it if: Anyone without a hub, and anyone who only wants to see a number rather than act on it.
Specifications, side by side
6 of 19 rows differ. Differences first.
| Specification | TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring | Aqara Temperature and Humidity Sensor T1 |
|---|---|---|
| Price | ₹1,499 | ₹1,799 |
| Battery life | Not applicable, mains powered | Approximately 2 years |
| Hub required | No -- Connects directly to the router | Yes -- Requires an Aqara hub, SmartThings, Home Assistant or another Zigbee coordinator |
| Local control | Yes. Schedules, timers and away mode all run on the plug itself and continue with no internet connection | Yes. Readings and hub-side automations continue without internet access |
| Power source | Mains, Indian 16 A three-pin | CR2032 coin cell |
| Protocol | Wi-Fi 2.4 GHz | Zigbee 3.0 |
| Works with | Amazon Alexa, Google Home, Tapo app | Apple Home, Alexa, Google Home and Home Assistant via the hub |
| Neutral wire | Not applicable | Not applicable |
| Warranty | 1 Year Manufacturer Warranty | 1 Year Manufacturer Warranty |
| Weather rating | IP20, indoor use only | IP20, indoor use only |
| Energy monitoring | Live wattage plus daily, weekly and monthly kWh history | not published |
| Humidity accuracy | not published | Plus or minus 3 percent RH |
| Humidity range | not published | 0 to 100 percent RH |
| Maximum load | 3680 W | not published |
| Rated current | 16 A | not published |
| Reporting | not published | On change, roughly every 0.5 degrees C or 3 percent RH |
| Schedules | Stored on the device | not published |
| Socket type | Indian 3-pin 16 A | not published |
| Temperature accuracy | not published | Plus or minus 0.3 degrees C |
| Temperature range | not published | -20 to 60 degrees C |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring with something else →