Sonoff ZBMINI Extreme Zigbee Smart Switch Module (No Neutral Required) vs Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
What separates them
These two differ on 7 recorded specifications. The Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67) is ₹700 dearer.
Sonoff ZBMINI Extreme Zigbee Smart Switch Module (No Neutral Required) vs Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
Sonoff
Sonoff ZBMINI Extreme Zigbee Smart Switch Module (No Neutral Required)
₹1,290
The specification that matters is in the name of the variant: L2 means no neutral wire.
Full details →Aqara
Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
₹1,990
A Rs1,990 device whose entire value is measured against the cost of the thing it prevents.
Full details →Who the Sonoff ZBMINI Extreme Zigbee Smart Switch Module is for
Buy it if: Anyone retrofitting an older Indian switchboard that has no neutral wire at the switch.
Avoid it if: Anyone without a Zigbee hub -- this cannot be used standalone, unlike a Wi-Fi module.
Who the Aqara Water Leak Sensor T1 is for
Buy it if: Anyone with a geyser, water tank, or washing machine on a floor that would be expensive to water-damage.
Avoid it if: Anyone without a Zigbee hub -- there is no standalone siren on the sensor itself.
Specifications, side by side
7 of 17 rows differ. Differences first.
| Specification | Sonoff ZBMINI Extreme Zigbee Smart Switch Module | Aqara Water Leak Sensor T1 |
|---|---|---|
| Price | ₹1,290 | ₹1,990 |
| Battery life | Not applicable, mains powered | Approximately 2 years |
| Hub required | Yes -- Requires a Zigbee coordinator such as SmartThings, Aqara Hub M2, or Home Assistant with a Zigbee stick | Yes -- Requires an Aqara hub or another Zigbee coordinator |
| Local control | Yes. Automations run on the Zigbee hub and continue working with the internet disconnected | Yes. The hub sounds its siren and runs automations with no internet connection |
| Neutral wire | Not required -- this is the model's entire purpose | Not applicable |
| Power source | Mains, wired behind an existing switch | CR2032 coin cell |
| Weather rating | IP20, enclosed in the switchbox | IP67 -- survives full immersion, which is the point |
| Works with | Home Assistant, SmartThings, Aqara, plus Alexa and Google via the hub | Apple Home, Alexa, Google Home and Home Assistant via the hub |
| Protocol | Zigbee 3.0 | Zigbee 3.0 |
| Warranty | 1 Year Manufacturer Warranty | 1 Year Manufacturer Warranty |
| Alarm | not published | Hub-side siren and push notification |
| Detection | not published | Two contact probes on the underside, triggers within 1 second |
| Diameter | not published | 50 mm |
| Maximum load | 6 A resistive, 200 W LED | not published |
| Physical switch | Works with existing rocker or momentary switches | not published |
| Placement | not published | Under sinks, behind washing machines, near water tanks and geysers |
| Size | 39 x 33 x 17 mm | not published |
| Zigbee role | Router -- extends the mesh for battery devices | not published |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Sonoff ZBMINI Extreme Zigbee Smart Switch Module with something else →
