GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack vs Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I
What separates them
These two differ on 1 recorded specification. The Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I is $69.03 dearer. They are different kinds of product — construction screws against step ladder — so read the table as two spec sheets rather than a like-for-like.
GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack vs Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I
GRK
GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack
$29.97
The star drive is the point: it does not cam out the way a Phillips head does, so the driver stays in the screw and the head survives being driven and backed out repeatedly.
Full details →Werner
Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I
$99.00
Fiberglass rather than aluminium is the specification that matters near electricity -- the rails do not conduct, which is why this is the ladder for anything involving a light fitting or a service panel.
Full details →Who the GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack is for
Buy it if: Deck framing, treated lumber and any assembly that will be taken apart again.
Avoid it if: Marine and coastal exposure, which needs stainless rather than a coating.
Who the Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I is for
Buy it if: Anyone working near electrical fittings, where an aluminium ladder is a hazard.
Avoid it if: Buyers who need reach above about 10 ft, who need an 8 ft ladder or an extension.
Specifications, side by side
1 of 16 rows differ. Differences first.
| Specification | GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack | Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I |
|---|---|---|
| Price | $29.97 | $99.00 |
| Warranty | Manufacturer defect warranty | 1-year limited warranty |
| Bit included | Yes, T-25 | not published |
| Coating | Climate coating for treated lumber | not published |
| Drive type | T-25 star drive | not published |
| Duty rating | not published | 250 lb, Type I |
| Head style | Washer head | not published |
| Ladder height | not published | 6 ft |
| Length | 3 in | not published |
| Pack quantity | 100 | not published |
| Rail material | not published | Fiberglass, non-conductive |
| Screw gauge | #10 | not published |
| Standards | not published | ANSI Type I, OSHA compliant |
| Step count | not published | 5 including the top |
| Step type | not published | Slip-resistant, serrated |
| Thread type | W-Cut, no pilot hole needed | not published |
| Working height | not published | About 10 ft |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack with something else →