GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack vs RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum
What separates them
These two differ on 1 recorded specification. The RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum is $99.03 dearer. They are different kinds of product — construction screws against wet dry vacuum — so read the table as two spec sheets rather than a like-for-like.
GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack vs RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum
GRK
GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack
$29.97
The star drive is the point: it does not cam out the way a Phillips head does, so the driver stays in the screw and the head survives being driven and backed out repeatedly.
Full details →RIDGID
RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum
$129.00
"Peak HP" is a marketing figure measured at stall, not a running rating -- the numbers worth comparing are airflow and sealed suction, and this pulls about 190 CFM.
Full details →Who the GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack is for
Buy it if: Deck framing, treated lumber and any assembly that will be taken apart again.
Avoid it if: Marine and coastal exposure, which needs stainless rather than a coating.
Who the RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum is for
Buy it if: Workshops and garages handling both sawdust and spills.
Avoid it if: Anyone wanting a portable vacuum for a vehicle or a stairwell.
Specifications, side by side
1 of 18 rows differ. Differences first.
| Specification | GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack | RIDGID 14 Gal. 6.0 Peak HP NXT Wet/Dry Shop Vacuum |
|---|---|---|
| Price | $29.97 | $129.00 |
| Warranty | Manufacturer defect warranty | Lifetime limited warranty |
| Airflow | not published | About 190 CFM |
| Bit included | Yes, T-25 | not published |
| Blower port | not published | Fitted |
| Coating | Climate coating for treated lumber | not published |
| Drive type | T-25 star drive | not published |
| Drum capacity | not published | 14 gal |
| Head style | Washer head | not published |
| Hose diameter | not published | 2-1/2 in |
| Hose length | not published | 7 ft |
| Length | 3 in | not published |
| Pack quantity | 100 | not published |
| Peak horsepower | not published | 6.0 peak HP, a stall measurement |
| Power source | not published | Corded, 120 V |
| Rated power | not published | About 1,400 W |
| Screw gauge | #10 | not published |
| Thread type | W-Cut, no pilot hole needed | not published |
| Wet pickup | not published | Yes, with filter removed |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the GRK #10 x 3 in. Star Drive Construction Screws, 100-Pack with something else →