DEWALT 20V MAX XR Brushless 4-1/2 in. Angle Grinder (Tool Only) vs Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I
What separates them
These two differ on 1 recorded specification. The DEWALT 20V MAX XR Brushless 4-1/2 in. Angle Grinder (Tool Only) is $60.00 dearer. They are different kinds of product — cordless angle grinder against step ladder — so read the table as two spec sheets rather than a like-for-like.
DEWALT 20V MAX XR Brushless 4-1/2 in. Angle Grinder (Tool Only) vs Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I
DEWALT
DEWALT 20V MAX XR Brushless 4-1/2 in. Angle Grinder (Tool Only)
$159.00
A cordless grinder trades runtime for the cable, and that trade only works with a 5 Ah battery or larger -- on a 2 Ah pack this cuts for a few minutes at a time.
Full details →Werner
Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I
$99.00
Fiberglass rather than aluminium is the specification that matters near electricity -- the rails do not conduct, which is why this is the ladder for anything involving a light fitting or a service panel.
Full details →Who the DEWALT 20V MAX XR Brushless 4-1/2 in. Angle Grinder is for
Buy it if: Trades already on 20V MAX who need a grinder away from power.
Avoid it if: Continuous cutting or grinding, where a corded grinder is cheaper and never stops.
Who the Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I is for
Buy it if: Anyone working near electrical fittings, where an aluminium ladder is a hazard.
Avoid it if: Buyers who need reach above about 10 ft, who need an 8 ft ladder or an extension.
Specifications, side by side
1 of 16 rows differ. Differences first.
| Specification | DEWALT 20V MAX XR Brushless 4-1/2 in. Angle Grinder | Werner 6 ft. Fiberglass Step Ladder, 250 lb Type I |
|---|---|---|
| Price | $159.00 | $99.00 |
| Warranty | 3-year limited warranty, 1-year free service | 1-year limited warranty |
| Batteries included | None -- tool only | not published |
| Battery platform | DEWALT 20V MAX | not published |
| Duty rating | not published | 250 lb, Type I |
| Ladder height | not published | 6 ft |
| Motor type | Brushless XR | not published |
| No-load speed | 9,000 rpm | not published |
| Rail material | not published | Fiberglass, non-conductive |
| Safety features | Electronic brake and kickback brake | not published |
| Spindle thread | 5/8 in-11 | not published |
| Standards | not published | ANSI Type I, OSHA compliant |
| Step count | not published | 5 including the top |
| Step type | not published | Slip-resistant, serrated |
| Tool weight | 4.0 lb bare | not published |
| Wheel diameter | 4-1/2 in | not published |
| Working height | not published | About 10 ft |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the DEWALT 20V MAX XR Brushless 4-1/2 in. Angle Grinder with something else →