Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67) vs TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring
What separates them
These two differ on 7 recorded specifications. The Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67) is ₹491 dearer.
Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67) vs TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring
Aqara
Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
₹1,990
A Rs1,990 device whose entire value is measured against the cost of the thing it prevents.
Full details →
TP-Link
TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring
₹1,499
This is the plug the US-pin Kasa four-pack should have been.
Full details →Who the Aqara Water Leak Sensor T1 is for
Buy it if: Anyone with a geyser, water tank, or washing machine on a floor that would be expensive to water-damage.
Avoid it if: Anyone without a Zigbee hub -- there is no standalone siren on the sensor itself.
Who the TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring is for
Buy it if: Anyone metering or scheduling a high-draw appliance who wants the schedule to survive an outage.
Avoid it if: Anyone on Apple Home, and anyone who needs more than one socket switched independently.
Specifications, side by side
7 of 18 rows differ. Differences first.
| Specification | Aqara Water Leak Sensor T1 | TP-Link Tapo P110 Smart Wi-Fi Plug 16A with Energy Monitoring |
|---|---|---|
| Price | ₹1,990 | ₹1,499 |
| Battery life | Approximately 2 years | Not applicable, mains powered |
| Hub required | Yes -- Requires an Aqara hub or another Zigbee coordinator | No -- Connects directly to the router |
| Local control | Yes. The hub sounds its siren and runs automations with no internet connection | Yes. Schedules, timers and away mode all run on the plug itself and continue with no internet connection |
| Power source | CR2032 coin cell | Mains, Indian 16 A three-pin |
| Protocol | Zigbee 3.0 | Wi-Fi 2.4 GHz |
| Weather rating | IP67 -- survives full immersion, which is the point | IP20, indoor use only |
| Works with | Apple Home, Alexa, Google Home and Home Assistant via the hub | Amazon Alexa, Google Home, Tapo app |
| Neutral wire | Not applicable | Not applicable |
| Warranty | 1 Year Manufacturer Warranty | 1 Year Manufacturer Warranty |
| Alarm | Hub-side siren and push notification | not published |
| Detection | Two contact probes on the underside, triggers within 1 second | not published |
| Diameter | 50 mm | not published |
| Energy monitoring | not published | Live wattage plus daily, weekly and monthly kWh history |
| Maximum load | not published | 3680 W |
| Placement | Under sinks, behind washing machines, near water tanks and geysers | not published |
| Rated current | not published | 16 A |
| Schedules | not published | Stored on the device |
| Socket type | not published | Indian 3-pin 16 A |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Aqara Water Leak Sensor T1 with something else →