Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0) vs Tata Power EZ Home Smart Wi-Fi Plug 16A with Energy Monitoring
What separates them
These two differ on 6 recorded specifications. The Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0) is ₹700 dearer.
Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0) vs Tata Power EZ Home Smart Wi-Fi Plug 16A with Energy Monitoring
Aqara
Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0)
₹1,799
The reason to own one is not to read the temperature -- your phone will tell you that.
Full details →
Tata Power
Tata Power EZ Home Smart Wi-Fi Plug 16A with Energy Monitoring
₹1,099
The 16 A rating is the reason to choose this over the 10 A plugs that dominate the price band -- it is the only kind that can safely switch a geyser, a 1.5 ton air conditioner or a washing machine.
Full details →Who the Aqara Temperature and Humidity Sensor T1 is for
Buy it if: Anyone already running a Zigbee hub who wants humidity or temperature to drive automations.
Avoid it if: Anyone without a hub, and anyone who only wants to see a number rather than act on it.
Who the Tata Power EZ Home Smart Wi-Fi Plug 16A with Energy Monitoring is for
Buy it if: Anyone who wants to measure or schedule a high-draw appliance such as a geyser or air conditioner.
Avoid it if: Anyone needing schedules that survive an internet outage -- these are cloud-side, not on-device.
Specifications, side by side
6 of 18 rows differ. Differences first.
| Specification | Aqara Temperature and Humidity Sensor T1 | Tata Power EZ Home Smart Wi-Fi Plug 16A with Energy Monitoring |
|---|---|---|
| Price | ₹1,799 | ₹1,099 |
| Battery life | Approximately 2 years | Not applicable, mains powered |
| Hub required | Yes -- Requires an Aqara hub, SmartThings, Home Assistant or another Zigbee coordinator | No -- Connects directly to the router |
| Local control | Yes. Readings and hub-side automations continue without internet access | No. Scheduling runs in the cloud, so schedules do not fire during an internet outage |
| Power source | CR2032 coin cell | Mains, 16 A three-pin socket |
| Protocol | Zigbee 3.0 | Wi-Fi 2.4 GHz |
| Works with | Apple Home, Alexa, Google Home and Home Assistant via the hub | Amazon Alexa, Google Home |
| Neutral wire | Not applicable | Not applicable |
| Warranty | 1 Year Manufacturer Warranty | 1 Year Manufacturer Warranty |
| Weather rating | IP20, indoor use only | IP20, indoor use only |
| Energy monitoring | not published | Yes, live wattage and cumulative kWh |
| Humidity accuracy | Plus or minus 3 percent RH | not published |
| Humidity range | 0 to 100 percent RH | not published |
| Maximum load | not published | 3680 W |
| Rated current | not published | 16 A |
| Reporting | On change, roughly every 0.5 degrees C or 3 percent RH | not published |
| Socket type | not published | Indian 3-pin 16 A |
| Temperature accuracy | Plus or minus 0.3 degrees C | not published |
| Temperature range | -20 to 60 degrees C | not published |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Aqara Temperature and Humidity Sensor T1 with something else →