Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0) vs Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
What separates them
These two differ on 3 recorded specifications. The Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67) is ₹191 dearer.
Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0) vs Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
Aqara
Aqara Temperature and Humidity Sensor T1 (Zigbee 3.0)
₹1,799
The reason to own one is not to read the temperature -- your phone will tell you that.
Full details →Aqara
Aqara Water Leak Sensor T1 (Zigbee 3.0, IP67)
₹1,990
A Rs1,990 device whose entire value is measured against the cost of the thing it prevents.
Full details →Who the Aqara Temperature and Humidity Sensor T1 is for
Buy it if: Anyone already running a Zigbee hub who wants humidity or temperature to drive automations.
Avoid it if: Anyone without a hub, and anyone who only wants to see a number rather than act on it.
Who the Aqara Water Leak Sensor T1 is for
Buy it if: Anyone with a geyser, water tank, or washing machine on a floor that would be expensive to water-damage.
Avoid it if: Anyone without a Zigbee hub -- there is no standalone siren on the sensor itself.
Specifications, side by side
3 of 18 rows differ. Differences first.
| Specification | Aqara Temperature and Humidity Sensor T1 | Aqara Water Leak Sensor T1 |
|---|---|---|
| Price | ₹1,799 | ₹1,990 |
| Hub required | Yes -- Requires an Aqara hub, SmartThings, Home Assistant or another Zigbee coordinator | Yes -- Requires an Aqara hub or another Zigbee coordinator |
| Local control | Yes. Readings and hub-side automations continue without internet access | Yes. The hub sounds its siren and runs automations with no internet connection |
| Weather rating | IP20, indoor use only | IP67 -- survives full immersion, which is the point |
| Battery life | Approximately 2 years | Approximately 2 years |
| Neutral wire | Not applicable | Not applicable |
| Power source | CR2032 coin cell | CR2032 coin cell |
| Protocol | Zigbee 3.0 | Zigbee 3.0 |
| Warranty | 1 Year Manufacturer Warranty | 1 Year Manufacturer Warranty |
| Works with | Apple Home, Alexa, Google Home and Home Assistant via the hub | Apple Home, Alexa, Google Home and Home Assistant via the hub |
| Alarm | not published | Hub-side siren and push notification |
| Detection | not published | Two contact probes on the underside, triggers within 1 second |
| Diameter | not published | 50 mm |
| Humidity accuracy | Plus or minus 3 percent RH | not published |
| Humidity range | 0 to 100 percent RH | not published |
| Placement | not published | Under sinks, behind washing machines, near water tanks and geysers |
| Reporting | On change, roughly every 0.5 degrees C or 3 percent RH | not published |
| Temperature accuracy | Plus or minus 0.3 degrees C | not published |
| Temperature range | -20 to 60 degrees C | not published |
Every row is a figure one or both products record. A blank is a figure the catalogue does not hold, not a zero.
Compare the Aqara Temperature and Humidity Sensor T1 with something else →